2013
Reaper
SubwooferS
REP-12
Enclosure Dimensions
Included in this manual are a number of different enclosure sugges-
tions. These are by no means the only enclosures to use, but they
provide a starting point to determine the correct enclosure for your
needs many factors must be addressed (amount of power, vehicle,
placement, crossovers, etc) Therefore, as always, SPL recommends
that your subwoofer be installed by an authorized SPL dealer.
Enclosure Construction
All enclosures should be made of .75” (3/4”) material only. When pos-
sible, make the baffle 1.5” (1 ½) thick and add .75” (3/4”) to the depth
of the enclosure to compensate. All volumes INCLUDE vent/port and
subwoofer displacements. DO NOT change the volume unless you
plan on adding a substantial amount of bracing. For added per-
formance, applying a coat of fiberglass resin to the interior walls will
greatly improve sealing the enclosure. Adding a thin layer of poly-fill
will improve response by smoothing out reflections within the enclo-
sure.
Rep12
seaLed
mInImum
optImum
poRted
1.0 cu Ft
1.25 cu Ft
mInImum
poRt WxL
F3 hz
1.5 cu Ft
4Inch x 7Inch
42.13
optImum
poRt WxL
F3 hz
2.0 cu Ft
4Inch x 10.5Inch
35.68
Download from Wwwww.Swom.Paonuwalse.croAmc. AolluMsatniuka.lcs oSemarch And Download.
|
Peg Perego Stroller Centro User Manual
Philips Automobile Battery Charger SJM2205 User Manual
Philips Clock Radio MG C105 17 User Manual
Philips DVD Recorder DVDR3455H 96 User Manual
Philips TV DVD Combo 21PT6820 05 User Manual
Philips VCR SVA106 User Manual
Pioneer GPS Receiver CRB2328 A User Manual
Pioneer Stereo Receiver VSX 1016V S User Manual
Polycom SONAR OMNIVS500 User Manual
ProForm Treadmill 505s User Manual