User Guide
Portsmith Model PS6PM5C-10
Product Description
The PS6PM5C-10 ten slot charging cradle is designed to simplify the charging and storing of multiple Palm devices. The
cradle employs a universal power supply that accommodates line voltages from 100VAC to 240VAC. This internal power
supply accepts standard IEC line cords. The power supplied to each cradle station is designed to mimic the characteristics of
the Palm power adapter supplied with the device. Each station provides a current limit by means of a self-resetting thermal
fuse.
Troubleshooting Matrix
Problem
Solution
Cradle is not charging device(s) Ensure that the charging cradle is receiving line voltage and that the
power switch is turned on.
Ensure that one of the Palm devices is occupying the first slot of the
cradle.
Remove Palm from slot wait five minutes and re-insert. If Palm
device is suspect, check with power adapter supplied by Palm.
Technical Support
For additional information, refer to the FAQ List in the Support Section at www.portsmith.com. If you need additional
assistance, you can contact technical support via e-mail at: [email protected] or directly by phone at (208) 395-1300.
Please provide the following information:
•
•
•
•
Name, email address, and phone number
Portsmith Multi-slot Cradle model number
Palm model number
Detailed problem description
Disclaimer
Portsmith, Inc. assumes no responsibility for any damage or loss resulting from the use of this user guide. Portsmith, Inc.
assumes no responsibility for any loss or claims by third parties that may arise through the use of this product. Portsmith, Inc.
assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, dead battery, or
repairs. Be sure to make backup copies of all important data on other media to protect against data loss.
Hardware Warranty
Portsmith, Inc. warrants this product against defects in materials and workmanship to the purchaser for a period of two (2)
years from the date of shipment. This warranty is limited to a repair or replacement of the product. To obtain warranty
service, the purchaser must first call Portsmith, Inc. for an RMA number, then return the product to Portsmith, Inc. for repair
or replacement.
Purchaser shall prepay shipping charges for products returned to Portsmith, Inc. Portsmith, Inc. will pay for return of the
products to purchaser, except that purchaser shall pay all shipping charges, duties, and taxes for products returned to
Portsmith, Inc. from a country other than the United States. Portsmith, Inc. makes no other warranty of any kind with regard
to this material. Portsmith, Inc. shall not be liable for errors contained herein or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.
Within thirty (30) days of receipt should the product fail for any reason other than damage due to customer negligence;
purchaser has the right to return the product for a full refund of the purchase price. If the purchaser wishes to upgrade or
convert to another Portsmith, Inc. product within the thirty (30) day period, purchaser has the right to return the product and
apply the full purchase price toward the purchase of the other product. Any other return will be subject to Portsmith, Inc.’s
existing restocking policy.
PORTSMITH, INC. WARRANTS THAT THIS PRODUCT IS NEW OR HAS BEEN REMANUFACTURED TO MEET
NEW STANDARDS USING NEW OR SERVICEABLE USED PARTS. PORTSMITH, INC. MAKES NO OTHER
WARRANTY, EITHER EXPRESSED OR IMPLIED, WITH RESPECT TO THIS PRODUCT. PORTSMITH, INC.
|